甘肃11选5Li-ion battery cathode electrode/Li-ion battery separator/thin film/substrate measuring.
Li-ion battery cathode electrode/Li-ion battery separator/thin film/substrate measuring.
1. Natural marble, no stress deformation, good long-term stability
甘肃11选52. Accuracy(3σ): ±0.8‰;
3. Max scanning range: 2000mm
Max scanning speed: 25m/min
1。 Max scanning range: 3000mm
甘肃11选52. Accuracy(3σ): ±1‰
3. Maxscanning speed: 25m/min
1. Multi data charts(horizontal trend chart, vertical trend chart, real time area density chart).
2. Support MES.
3. EWMA advance SPC.
1.100KHz raw data acquisition
2。Encoder signal and area density analog signal acquiring synchronously
With structure patent of radiation protection, Patent NO: ZL 2015 2 0307944.3
The amount of X/β radiation meets the exemption standard (amount of radiation < 1uSv/h)
Auto electrode connection and auto mark mechanism to avoid operator close to the radioactive source。Coater close-loop control function
Close-loop adjusts pump speed of coaters with measured area density data.Measuring electrode’s length, width, up-down alignment
1. Integrated component of electrode’s length, width, up-down alignment measuring.
2. Measurement method: laser sensor + encoder + electrode dislocation detector
甘肃11选5X/β-Ray multi-frame synchronous gauge system is able to eliminate the effects of area density fluctuation of substrate and area density fluctuation of single coating film.
X/β-Ray multi-frame synchronous gauge system is able to eliminate the effects of area density fluctuation of substrate and area density fluctuation of single coating film。
Trace error: ±3mm(Coating speed at 0~30m/min)
Trace error: ±5mm(Coating speed at 30~60m/min)
Industrial EtherCat bus structure, response time < 1msAuto trace error eliminating
Auto eliminating trace error on x/y direction caused by encoder。
Double frame area density synchronous gauge system manufacturing application.
1. Informative user interface, showing area density data of side A, side B and net coating
2. Support MES, uploading data automatically
3. Statistic function: CPK/Max/Min.
2nd frame data shows total weight less than specification, but no need to adjust coater parameters, since double frame synchronous gauge system detect that the fluctuation caused by copper foil not the coater.
Laser thickness gauge measure the thickness of electrode with high precision and non-destructive。 Products of DCPRE such as coating-type/calendering-type laser thickness gauge are widely accepted by first-tier battery manufacturers, including ATL/BYD/LiSheng/A123 Battery etc。
Real time measuring the thickness profile of 30mm range thin margin at all sides of electrode, ensuring cell balance, avoiding lithium-ion plating.
Concentricity of laser beams less than 0。01mm with DCPRE patent。Real time self-adjust and anti-vibration
Able to eliminate interference from environment (mechanical error, environmental factor, floor vibration) and up-down fluctuation of electrode.Close-loop control function
Close-loop adjusts roll gap and pressure of calendering machine with thickness data.
1. Informative thickness trend charts.
2. Statistic function CPK/Max/Min.
Measure area density of electrode margin more precisely by integrating X/β-Ray area density sensor and laser thickness sensor. Spot size of area density: 1mm.
Accuracy (3σ): ±1‰
甘肃11选5Range: 0-1000 g/㎡
Add:No.A5 Building, Fufa Industrial Park, No.3 Fuyuan 1 Road, Heping District, Fuyong Street, Baoan District,
Copyright Shenzhen Dacheng precision equipment Co., Ltd. All Rights Reservedbr
Record number: Guangdong ICP prepare 20160121-01 number